RM3090E _59 Vehicle Exterior _008795 WIPER / WASHER _0050085 REAR WIPER MOTOR G

WIPER / WASHER  REAR WIPER MOTOR  INSPECTION  


PROCEDURE

Hide 85110R 1.INSPECT REAR WIPER MOTOR ASSEMBLY

E261527
1.083,1.833 1.427,1.448 true 1.719,1.448 2.083,1.833 true 0.688,1.375 1.188,1.375 true 0.073,0.063 0.385,0.26 0.313,0.198 10 *a 2.063,1.865 2.375,2.063 0.313,0.198 10 LS 0.969,1.865 1.281,2.063 0.313,0.198 10 +B 0.573,1.313 0.885,1.51 0.313,0.198 10 E
*a
LS
+B
E
*a Component without harness connected (Rear Wiper Motor Assembly)


a.

Check that the rear wiper motor assembly operates.

NOTICE:

Check that the body ground is connected.


i.

Apply battery voltage to the rear wiper motor connector and check the speed of the rear wiper motor assembly.

OK:
Measurement Condition Specified Condition
Battery positive (+) → Terminal 4 (+B)
Battery negative (-) → Terminal 3 (LS)
Battery negative (-) → Terminal 5 (E) 		Motor operates


If the result is not as specified, replace the rear wiper motor assembly.



b.
E261527
0.781,1.375 1.198,1.375 true 2.188,1.844 1.927,1.458 true 1.219,1.865 1.469,1.448 true 1.135,1.854 1.448,2.052 0.313,0.198 10 +B 0.094,0.083 0.406,0.281 0.313,0.198 10 *a 0.635,1.302 0.948,1.5 0.313,0.198 10 E 2.135,1.854 2.448,2.052 0.313,0.198 10 C1
+B
*a
E
C1
*a Component without harness connected (Rear Wiper Motor Assembly)


Check the wiper intermittent operation.

NOTICE:

Check that the body ground is connected.


i.

Apply battery voltage to the rear wiper motor connector and check the speed of the rear wiper motor assembly.

OK:
Measurement Condition Specified Condition
Battery positive (+) → Terminal 4 (+B)
Battery negative (-) → Terminal 2 (C1)
Battery negative (-) → Terminal 5 (E) 		Motor operates


If the result is not as specified, replace the rear wiper motor assembly.